XLR 3 pin female or 0.25 inch 3 pole A gauge jack combination socket (Note 2)
Headphone Output
0.25 inch 3 pole a gauge jack socket (Note 2)
Pin Connections
Inputs
PIN 1 (sleeve) GROUND; PIN 2 (tip) SIGNAL; PIN 3 (ring) RETURN. To unbalance connect PIN 3 to ground
Headphone Output
SLEEVE: COMMON; RING: RIGHT SIGNAL; TIP: LEFT SIGNAL
PP3 Alkaline Battery Life
50 Hours typical
External DC Connector
2.5 mm centre pin positive (Note 3)
Dimensions
Width 80 mm; Height 45 mm; Depth 135 mm
Weight
300 gm including battery
Notes to specifications
1.
Measurements of dBu are dB with respect to 0.775 volts
2.
Various adaptors are available to convert to alternative connector standards. See Accessories
3.
The unit may be operated from an external supply between 6 and 12 volts DC (maximum) at 15 mA quiescent, 100 mA peak. The recommended voltage is 9 volts. The supply should be floating and regulated
4.
A fitted belt clip is available to special order
Operating Controls
Front Panel
Mono/Stereo Selector
Two Position slide switch
Connectors
Stereo line inputs; Headphone Output
Rear Panel
Battery Holder
PP3 externally accessible
Power on/off
Two position slide switch with LED indicator
Connector
External DC supply
««Description««
Conford, Liphook, Hampshire, GU30 7QW, UK +44 (0)1428 751469 contact@confordelec.co.uk www.confordelec.co.uk/ Webmaster: John
.jpg "Banner")
-1.jpg){kind=small}
